Does anyone have files to print a 3D stand for the mini revo? I know there’s a full-size one on thingiverse. But before I modify that design just reaching out to see if anyone has done this already.
Thanks,
3D Printed Mini Stand
-
- Posts: 161
- Joined: Thu Apr 02, 2020 7:19 pm
3D Printed Mini Stand
Looking to purchase:
Limited/Special Edition (Extreme/Metal --> Black and Black merc)
PM or email (preferred): linnick.christopher@gmail.com
Limited/Special Edition (Extreme/Metal --> Black and Black merc)
PM or email (preferred): linnick.christopher@gmail.com
-
- Posts: 57
- Joined: Sat Aug 06, 2011 12:44 pm
- Location: Denmark
Re: 3D Printed Mini Stand
If you want something like the one I made:
https://www.thingiverse.com/thing:3837121
I should be able to adjust the dimensions to fit the mini.
Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
https://www.thingiverse.com/thing:3837121
I should be able to adjust the dimensions to fit the mini.
Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
- 03SVTCobra
- Posts: 1530
- Joined: Wed Jun 09, 2010 11:46 pm
- Location: NY
Re: 3D Printed Mini Stand
These are sweet i need to figure out why the 3d printer at work isnt reading my files and print some!Buschfunch wrote: ↑Sun May 17, 2020 10:38 am If you want something like the one I made:
https://www.thingiverse.com/thing:3837121
I should be able to adjust the dimensions to fit the mini.
Just write the dimensions I would need to make the hole in the stand (nut diameter and length + first part of the cylinder)
BU00060 GR00060 BR00060 AG00060 AU00060
R00060 OR00060 LM00060 TI00030 CU00060 AQ00060 IN00060
MT00060 TQ00060 GM HM
Blue Obs Green Obs Black Obs Black Obs V2 Red Obs
R00060 OR00060 LM00060 TI00030 CU00060 AQ00060 IN00060
MT00060 TQ00060 GM HM
Blue Obs Green Obs Black Obs Black Obs V2 Red Obs